How to select wood and board

2022-07-22
  • Detail

Choose wood plate

1, weight

1. Blockboard: it has good moisture-proof effect and cannot be painted directly. The middle of the blockboard is a core bonded by natural wood strips, and both sides are bonded with a very thin veneer, which is one of the most important materials in decoration. It can be used for furniture, wooden doors, door jambs, heating hoods, curtain boxes, etc., with good waterproof performance. When selecting, look at its internal wood. It should not be too broken. Blockboard with a gap of about 3mm between the wood is appropriate. Because the exposed wood grain on the surface is not beautiful, it is rarely painted directly, and the decorative plywood is usually pasted. Furniture and other woodwork made with it need to go through two processes: gluing board and painting, and the cost is higher

square decoration

2. Integrated board: it is not easy to deform. It is a new solid wood material, which is made of high-quality imported large-diameter logs, and is staggered and spliced like fingers. Due to different processes, this kind of board has superior environmental protection performance, which is 1/8 of the allowable formaldehyde content of blockboard. On the other hand, this kind of board made of solid wood such as American spruce can be directly colored and painted, which saves a process compared with Blockboard

3. The nail holding force of medium density board is worse than that of particleboard. Particleboard is the main material of cabinets at present, which is made of natural wood after being crushed into granules and pressed into boards. MDF is formed by pressing powdered sawdust, with good flatness but poor moisture resistance. In contrast, the nail holding force of density board is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix the density board because of its low strength, so it is rarely used as a cabinet

Huili floor

4. Veneer plywood: easy and cheap multilayer board, also known as plywood and plywood, with different layers and different names. Its advantages and disadvantages mainly depend on the raw materials. At present, veneer plywood is mainly used in home decoration, that is, very thin solid wood veneer has been pasted on the plywood in the factory. Veneer plywood is easy to use and cheap

郑州性病医院

广州儿科医院

上海癫痫医院

Copyright © 2011 JIN SHI